2-PIN EU Plug In Night Light
- Plug In Night Light
- With Remote control (CR-203(A ) Battery Cell included to be much more convenient.
- 3 Energy saving timer modes
- 5 Brightness Adjustable
- Not too bright, not too dim, just the right amount of light to see where you are going in the dark.
- Built-in sensitive light sensor, the nightlight automatically turns on at dusk and off at dawn.
- The nightlight is perfect for hallway, bathroom, bedroom, kitchen, living room, nursery, kids room or anywhere you need some extra light.
|Plug Type||EU 2-Pin(Type C, E & F compatible)|
|Remote Control Distance:||Max 6M|
|Remote Control Angle||Max 45°|
|Input||AC 230V 50Hz/40MA 0.8（Max)|
|Number of LED’s||Number Of LED’s 8|
- Using the toggle switch at the bottom of the plug, you can change the settings:
- -‘REMOTE’-Remote mode
- -‘ON’- Light always on
- -‘OFF’-Light off
- Plug the product into the electric socket with the switch set to ‘REMOTE’. The light will enter ‘REMOTE’ control mode I
- Ensuring you are in clear line of sight and within 8 meters range, point the remote towards the plug, pressing the ‘POWER ON'(E) or ‘POWEROFF'(H) button on the Remote Control to turn on or turn off the Night Light.
- To adjust the brightness press ‘- ‘ (F) or’+'(G) to decrease or increase the lights . The remote control mode has the memory function for brightness, which can remember the brightness level you set last If the plug is disconnected from the socket or switched to another mode, this is reset to the default setting.
- Using the Time Selection buttons (I): If you want to set up the light to switch off after 15, 30 or 60 minuses. Press one of the relevant buttons on the remote and the light will flash twice to confirm.