Adjustable Wattage Microwave Sensor CCT LED IP65 Bulkhead
Introducing the incredibly adaptable Dual Power Color Changing CCT LED IP65 Bulkhead.
The Microwave Sensor allows you to adjust the detection area, hold time, and daylight detection. This all- in- one bulkhead provides CCT (color changing technology) switching, enabling you to switch between Warm White 3K, Cool White 4K, Day Light 6K, and has a IK10 impact rating. This fitting also boasts a waterproof rating of IP65, making it suitable for both indoor and outdoor installation.
Complete with a fast-fit hinged gear tray, a push fit connector and an LED driver, makes installation easy. Available in Microwave, Emergency, and Microwave Emergency.
- Power Switchable 11W – 15W
- IP rating – IP65
- IK10 rating
- Beam 120
- CLASS II
- Lumens – 11W > 1140lm, 15w >1540lm
- Four conduit entry knockouts on each side and two rear entry points/knock-outs
- 320mm diameter with a low profile depth 75mm
- TPA Rated and UV Stabilised
- Available black or white colors
- CCT Switchable – 3000K, 4000K, 6000K
- Ideal wall / ceiling mountable luminaire for internal & external
- Microwave Sensor can adjust the detection area, hold time, and daylight detection
- 3 year warranty (1 year battery warranty – Emergency or Combined Version – Sensory & Emergency
Description:
The 5.8Ghz Microwave Sensors can be built in totally enclosed lighting fixture thanks to microwave technology, and could be applied in public area like corridors, sidewalks, parking garage, warehouse, as well as big office areas to save every possible watt and energy consumption.
The LED ceiling light/wall light with built-in microwave motion sensor, which turns on the light on detection of people movement, and turns off or keep in a certain dimming level after a pre-selected hold-time when there is no people around. A daylight sensor is also built-in to prevent the light switching on when there is sufficient natural light.
The special of Liliway designs are followings:
- The detection area can be selecting the combination on the DIP switches to fit precisely for each specific application.
- Hold time is adjustable by DIP switch, means the time period you would like to keep the lamp on 100% or certain dimming level after the person has left the detection area.
- The Daylight sensor can be also set on DIP switch to fit for particular applications.
