L1MV-RAG IP65 Aluminum Die-casting Outdoor Wall Lights With Sensor
Key Features:
- Impact-resistant IP65,IK10
- Multiple functions: Standard / Microwave sensor /Emergency
- Fully integral emergency versions
- Corridor control function option
Construction Features:
- Impact-resistant IP65,IK10
- die-cast aluminium finished in polyester powder coating
- Four removable screws
- Exterior use
- Wall or ceiling mountable
- Painted white (RAL 9010) or gray (RAL 7037) or black finish in UV-resistant polyester powder coating.
Application:
- Pathways & pedestrian areas
- Retail parks
- Civic areas
- Housing
- Commercial
Available designs:
1: Emergency:Maintained 3 hours available on all versions.
2: Sensors:Available with microwave occupancy sensor built-in.
3: Dimming:Dim-to-20%(corridor function) available.
Specifications:
- Power Supply: 220-240 50-60Hz
- Power:15W/20W or customized
- Source of light: SMD2835
- Luminous Flux: 1200LM/1600LM
- Lumen Efficiency:80LM/W
- CRI:>80
- Power Factor:>0.9
- IP Rating:IP65
- Microwave sensor: 5.8GHz Microwave motion sensor
- Color Temperature: 3000K-6000K
- Working temperature: -20℃-30℃
- Lifespan:5000Hrs
- Size: Diameter 275mm* Height 85mm
Available designs:
1: Standard ON/OFF + 5.8Ghz ISM Microwave Sensor
2: Standard ON/OFF + 5.8Ghz ISM Microwave Sensor + Emergency pack
3: Standard ON/OFF+ DALI Dimming+ DALI HF Sensor
4: Standard ON/OFF+ RF Master/Slave+5.8GHz ISM Microwave Sensor + Emergency pack
5: Standard ON/OFF
6: Standard ON/OFF+ Emergency
Description:
The 5.8Ghz Microwave Sensors can be built in totally enclosed lighting fixture thanks to microwave technology, and could be applied in public area like corridors, sidewalks, parking garage, warehouse, as well as big office areas to save every possible watt and energy consumption.
The LED ceiling light/wall light with built-in microwave motion sensor, which turns on the light on detection of people movement, and turns off or keep in a certain dimming level after a pre-selected hold-time when there is no people around. A daylight sensor is also built-in to prevent the light switching on when there is sufficient natural light.
The special of Liliway designs are followings:
- The detection area can be selecting the combination on the DIP switches to fit precisely for each specific application.
- Hold time is adjustable by DIP switch, means the time period you would like to keep the lamp on 100% or certain dimming level after the person has left the detection area.
- The Daylight sensor can be also set on DIP switch to fit for particular applications.
